Showing posts with label free recipe. Show all posts
Showing posts with label free recipe. Show all posts

Thursday, 28 February 2013

Happy Easter! Kaolin Bath Bombs Recipe


This recipe uses a fabulous British product - Cornish Kaolin Clay - and makes a ROCK hard bath bomb. Perfect for novelty bath bombs such as the massive Easter Egg shell pictured here.  

Colourful & calorie free, this was made using a cracked effect chocolate egg mould (you can now buy one here) which we filled leaving a hollowed out centre.  Doing so enabled us to "fill" the egg with 60mm bath bomb eggs.  The two halves were then simply tied together with curling ribbon so that the inner contents could be seen.

Using the clay appears to speed up the drying time and in turn helped with moulding such a large form.

In combination with Witch Hazel, this is a fairly easy recipe to use for all situations and one that you could adapt to make any kind of bath bomb fizzer.  




INGREDIENTS:

600g Sodium Bicarbonate
300g Citric Acid
50g Corn Flour
75g Kaolin Light BP Grade Clay
10ml Coconut Fragrance (any of your choice)
Acid Red water soluble powder colour
Witch Hazel spritz to bind 




METHOD:

Combine all of the dry ingredients thoroughly in a plastic or glass bowl kept for the purpose.
Add the tip of a teaspoon of powder colour and mix well. The colour will not be apparent until you add moisture, so don't be tempted to add too much.
Add your fragrance whilst mixing constantly with (gloved) hands
Spritz 5 or 6 sprays at a time with Witch hazel, repeating 6 or 8 times or until the mix holds together when pressed in the palm of your hand. The correct consistency is the same as is needed when making successful sandcastles - damp but not over wet.
Press into the mould with fingers, spreading evenly and leaving a hollow in the middle of the mould.
Set aside to dry for 15 minutes before removing carefully and allowing to dry completely (1 hour)

You can of course use the mix in any mould and adapt the colour and fragrance to suit.

Enjoy!








Thursday, 20 September 2012

How to Make Prim Heart Bath Melts

We so wanted to share these lovelies with you, as they are simple to make but better yet, they are truly fabulous to use.  So finally, here they are!



So what is a bath melt?

You simply pop one into  your (running) bath.  The natural Cocoa, Shea and Natural Vegetable oils will melt in the warmth of the water, but as you probably guessed they will not disperse fully.  Instead, the oils will be drawn to your skin providing instant moisturising without the effort!

When you finally get out of your bath (take care, it will be slippery and we strongly recommend the use of a bath mat) all you need do is pat your skin dry.  A film of skin loving oils will remain, leaving you with a wonderful pampered feeling.

We're using our Prim Hearts Mould which can also be used for fizzers and soaps, but you can of course use any suitable mould.  Keep the size small, there is no need to have a huge chunk of a melt in your bath.  Novelty ice trays will work as will guest soap moulds.  As this is an oily recipe, it will work well with re purposed yoghurt pots etc too. and should not give you too many de moulding issues whatever the shape.  As with soaps, chilling before de moulding will help tremendously.





What you need to make around 6 melts. (Multiply up if you want to make more)

A mould with a capacity of around 120-130g divided between cavities of around 20-25g (If you don't know the capacity, weigh your mould empty and then again with water in it to calculate the rough capacity)

(both fragrances can of course be substituted for your preference)

Due to the oil rich nature of this recipe, the melts that you make are known as a "leave on" product.  That is, there is an increased element of dermal exposure to the fragrance; the oil and the fragrance within the melts will cling to the skin and not be washed away.  

This is in contrast to a melt and pour soap for example that you rinse away and is termed a "wash off" product.  These two classifications are especially relevant for those making and selling products - the two have different permitted levels of fragrance and allergens in the final product.

Of course at home there are no regulations covering your own creations made for personal use, but the rules exist as a point of safety. For this type of recipe, use no more than 1% fragrance or essential oil in your mix in total. This recipe uses around 129g of ingredients and so using 1ml in total of fragrance will keep you within the recommendations.  Our suggested fragrances Rosemary and Thyme have relatively low levels of allergens in their formulation.  Allergen free fragrances are available here

Rosemary & Thyme make a fabulous fragrance combination that should not be kept for stuffing!  But you may also have other ideas. Don't be shy - you can combine any of our cosmetic grade fragrance concentrates to create your own classy combinations but please don't mix Essential oil and fragrance oil.  How about Vanilla & Cinnamon for a warm spicy autumnal soak? Or English Rose & Patchouli for a sensual soak?

Method

Using a saucepan over a very low heat, melt your Cocoa Butter first.  When half liquid, add your Shea Butter and Oil.  Stir gently until completely liquid but do not overheat.

Remove from the heat and allow to cool for 5 minutes.  Add your fragrance and stir.

Cool for a further 5-15 minutes, observing the mix to ensure it is not setting.

Pour into your moulds.

Allow to cool, refrigerate until cold before popping out of the mould.

For our Prim Heart mould, turn the mould upside down and press firmly but gently in the middle of each cavity.  Your melts should release easily.  If not, they may not be cold enough - pop them back in the fridge.

Wrap & Enjoy!












Saturday, 28 April 2012

Top 10 Tips - Bath Bombs



As we've had many people asking for help with their Bath Bomb making recently, we thought it would be a good idea to revisit this earlier post.

Hand made bath bombs are a joy to use and so much fun to make.  With a few pointers, it's simple to learn to create your own bath fizzers easily at home and it's a great activity to share with children.  Once you've mastered the basics, you can create gifts for friends and family to be proud of.  After all, there's nothing quite like a hand made gift!

As always, feel free to contact us if you need more help 

1) Select your Citric Acid carefully; Super fine granules (table salt size) are best. Powder is too volatile, whilst coarse granules have a lumpy appearance and may "bobble" as your bath bombs dry out.

2) Be fussy about your Bicarb! Fine food grade Sodium Bicarbonate is best. Technical grade may contain unwanted impurities and granular varieties will result in a coarse looking bath bomb.


3) Want smooth bath bombs? Use Cornflour (Cornstarch) as 10-15% of your dry ingredient content. Cornflour also helps control the fizzing reaction between the ingredients as you are mixing.

4) Dry Ingredients = food grade.   Some of the ingredients such as Bicarb, Citric & Cornflour can be sourced in food stores.

5)Wet ingredients = cosmetic/toiletry grade. Fragrance, colours, etc should be purchased as cosmetic/toiletry grade.  Essential oils should be pure or blended with base oils.

6) Don't use water. Really, don't. Using water to bind your mix causes fizzing & expansion in the mixing process. Fact. Result = stressful and unattractive mad panic to get the mix to stick and mould without turning into a fizzing flop. (You can do it - but why?!) Vegetable Base Oils (Sweet almond, Grape Seed etc) or Witch hazel work well. Witch Hazel speeds the drying time so that your bath bombs can be safely handled/removed from their moulds within minutes.(depending upon the size of the mould) 

7) Spray your "wet" ingredients onto the mix. If using Witch Hazel to bind, always spritz from a fine mist "finger" spray. Oil can be "dripped" into your mix or sprayed on with the aid of a trigger type spray (the sort you get on a Febreeze bottle). Spraying helps distribute the oil more evenly and therefore there is less risk of some premature fizzing in the bowl.

8) Wear gloves and mix with your hands. You will learn to detect the correct consistency for making the perfect bath bombs, but believe me you will get there faster by using your hands as opposed to a spoon. Simply spray or pour with one hand whilst mixing with the other.

9) Ensure your moulds or containers are dry. Keep them away from the bowl when mixing/spritzing to avoid wetting them accidentally.  Sound obvious? Hmmm well we've been there.  Wet moulds = stuck & stranded creations! If this happens and you cannot remove your bath bomb - run the whole mould under the tap - it's preferrable to breaking the mould.  Alternatively, I've taken an entire-mould-stranded-but-otherwise-perfect bath bomb into the bath before. (Waste not want not as my Gramma said.) 

10) Don't over wet your mix; aim to achieve the same consistency that is needed to make really good sandcastles.  Damp enough to hold together but not sloppy. You can always add more moisture but if you've overdone it, it's almost impossible to recover your mix and adding more dry ingredient rarely helps.

11) Avoid steamy kitchens! Set your creations aside to dry in a damp free atmosphere.  If you've cooked a roast, rustled up some bath bombs and set them aside in your kitchen you may find when you return to admire them later that they've developed "bobbles". This is simply the damp in the air and can be avoided.




We hope these have been useful tips...We'd love to hear your experiences, so please do comment below :)


PS... ok so there are 11 top tips. Things don't always go to plan.... a bit like making bath bombs! Perhaps the best things in life are meant to be a little harder to achieve?  Philosophy aside, if you'd like a few more free recipes, hints and tips - why not sign up to our newsletter?  We won't spam you, but we will send you exclusive offers, the latest product news and free tips & recipes from time to time



Friday, 25 March 2011

Top Ten Tips for Making Bath Bombs

1) Select your Citric Acid carefully; Super fine granules (table salt size) are best. Powder is too volatile, whilst coarse granules have a lumpy appearance and may "bobble" as your bath bombs dry out.

2) Be fussy about your Bicarb! Fine food grade Sodium Bicarbonate is best. Technical grade may contain unwanted impurities and granular varieties will result in a coarse looking bath bomb.


3) Want smooth bath bombs? Use Cornflour (Cornstarch) as 10-15% of your dry ingredient content. Cornflour also helps control the fizzing reaction between the ingredients as you are mixing.

4) Dry Ingredients = food grade.   Some of the ingredients such as Bicarb, Citric & Cornflour can be sourced in food stores.

5)Wet ingredients = cosmetic/toiletry grade. Fragrance, colours, etc should be purchased as cosmetic/toiletry grade.  Essential oils should be pure or blended with base oils.

6) Don't use water. Really, don't. Using water to bind your mix causes fizzing & expansion in the mixing process. Fact. Result = stressful and unattractive mad panic to get the mix to stick and mould without turning into a fizzing flop. (You can do it - but why?!) Vegetable Base Oils (Sweet almond, Grape Seed etc) or Witch hazel work well. Witch Hazel speeds the drying time so that your bath bombs can be safely handled/removed from their moulds within minutes.(depending upon the size of the mould) 

7) Spray your "wet" ingredients onto the mix. If using Witch Hazel to bind, always spritz from a fine mist "finger" spray. Oil can be "dripped" into your mix or sprayed on with the aid of a trigger type spray (the sort you get on a Febreeze bottle). Spraying helps distribute the oil more evenly and therefore there is less risk of some premature fizzing in the bowl.

8) Wear gloves and mix with your hands. You will learn to detect the correct consistency for making the perfect bath bombs, but believe me you will get there faster by using your hands as opposed to a spoon. Simply spray or pour with one hand whilst mixing with the other.

9) Ensure your moulds or containers are dry. Keep them away from the bowl when mixing/spritzing to avoid wetting them accidentally.  Sound obvious? Hmmm well we've been there.  Wet moulds = stuck & stranded creations! If this happens and you cannot remove your bath bomb - run the whole mould under the tap - it's preferrable to breaking the mould.  Alternatively, I've taken an entire-mould-stranded-but-otherwise-perfect bath bomb into the bath before. (Waste not want not as my Gramma said.) 

10) Don't over wet your mix; aim to achieve the same consistency that is needed to make really good sandcastles.  Damp enough to hold together but not sloppy. You can always add more moisture but if you've overdone it, it's almost impossible to recover your mix and adding more dry ingredient rarely helps.

11) Avoid steamy kitchens! Set your creations aside to dry in a damp free atmosphere.  If you've cooked a roast, rustled up some bath bombs and set them aside in your kitchen you may find when you return to admire them later that they've developed "bobbles". This is simply the damp in the air and can be avoided.




We hope these have been useful tips...We'd love to hear your experiences, so please do comment below :)


PS... ok so there are 11 top tips. Things don't always go to plan.... a bit like making bath bombs! Perhaps the best things in life are meant to be a little harder to achieve?  Philosophy aside, if you'd like a few more free recipes, hints and tips - why not sign up to our newsletter?